Duane Buziak

Duane Buziak
Mortgage Maestro | NMLS #1110647 | Coast2Coast Mortgage LLC
Licensed mortgage broker serving Virginia, Florida, Tennessee, Georgia, Washington DC, North Carolina, South Carolina, and Maryland, specializing in VA home loans and first-time homebuyer programs.

On a $350,000 balance, dropping your rate from 7.00% to 6.25% can cut your principal-and-interest payment by about $173 a month. If closing costs run $5,500, you need roughly 32 months of savings to recoup them. That number is your break-even point, and it decides whether a refinance pays off. These rates are illustrations, not quotes.

This guide shows Richmond, VA homeowners with a Conventional, FHA, or VA loan how to run a refinance break-even calculation, step by step. Have three things ready: your latest mortgage statement, your current rate and remaining term, and a written Loan Estimate for the new loan. By Duane Buziak, NMLS #1110647.

  1. Step 1: Gather Your Current Loan Details and Home Value
  2. Step 2: Get a Real Loan Estimate for the New Loan
  3. Step 3: Total Up the True Cost of Refinancing
  4. Step 4: Calculate Your Monthly Savings
  5. Step 5: Divide Costs by Savings to Find Your Break-Even Month
  6. Step 6: Compare Refinance Programs Before You Commit
  7. Step 7: Decide Whether the Break-Even Point Makes Sense for You
  8. Re-Run the Numbers With a Fresh Loan Estimate Before You Lock
  9. Refinance Break-Even Questions Answered

Step 1: Gather Your Current Loan Details and Home Value

Open your most recent mortgage statement and write down five items: the unpaid principal balance, the interest rate, the remaining term, the monthly principal-and-interest (P&I) payment, and the escrow amount. Keep P&I separate from taxes and insurance. Escrow follows your property taxes and homeowners insurance, not your rate, so only the P&I portion changes in a refinance. Comparing your whole payment to a new P&I figure will overstate your savings.

Next, note which program you hold today: Conventional, FHA, or VA. That choice determines your options. An FHA loan may qualify for an FHA Streamline, a VA loan for an Interest Rate Reduction Refinance Loan (IRRRL), and a Conventional loan for a standard rate-and-term refinance. Step 6 compares them.

Then estimate your home’s value with a city-wide reference. Zillow publishes home value data that you can filter to the city of Richmond, and Virginia REALTORS releases market reports with median sale prices. Use these for a rough sense of equity. Skip hand-picked neighborhood comps, which tend to flatter the result. A lender’s appraisal sets the real number, and some streamline refinances skip the appraisal altogether.

Common mistake: using your original loan amount instead of today’s payoff balance. If you borrowed $360,000 a few years ago, your balance is lower now. Your statement shows the current figure, and a payoff request from your servicer shows the exact amount including interest owed to the payoff date.

Step 2: Get a Real Loan Estimate for the New Loan

Decide what to price first. A rate-and-term refinance replaces your loan with a new rate, a new term, or both, without taking cash out. Ask for quotes on a 30-year, a 20-year, and a 15-year so you can see how the term moves both the payment and the break-even month.

Then request a Loan Estimate. This is the standardized three-page form lenders must provide, and the Consumer Financial Protection Bureau explains each section. For this exercise you need two places:

Duane Buziak can start with a NoTouch Credit Pull, a soft-pull pre-approval, so you can see real numbers without a hard inquiry denting your score while you compare options.

Rates move daily, so every quote is good only as of its pricing date. Write that date next to each number. For the general rate environment, the Freddie Mac Primary Mortgage Market Survey is a useful weekly reference, but it is a national average and not a quote you can lock.

Dare to Compare: when you collect more than one Loan Estimate, line them up side by side and compare identical lines, such as rate, Section A, Section B, Section C, and the lender credit. A lower rate with higher fees can lose to a slightly higher rate with far lower costs, and only a line-by-line comparison shows it.

Step 3: Total Up the True Cost of Refinancing

Sort every line of the Loan Estimate into three buckets:

Prepaids and escrow deposits are not true refinance costs. You would owe that interest and those taxes anyway, and the old escrow account is refunded to you. Leave them out of your break-even total. Many people count them and talk themselves out of a refinance that works.

Add financed charges that raise your balance. On an FHA loan, the upfront mortgage insurance premium (MIP) is usually financed, and the U.S. Department of Housing and Urban Development publishes the current MIP rules. On a VA loan, the funding fee is often rolled in, and the VA funding fee table lists current percentages. Both change over time, so confirm the 2026 figures before you finalize your math.

You may also see no-out-of-pocket closing options. Here the closing costs are covered by a lender credit in exchange for a somewhat higher rate. Your monthly savings shrink, but your upfront cost drops to little or nothing. Step 5 runs this scenario.

Mistake to avoid: rolling costs into the loan and forgetting the interest they add. A $5,500 cost financed at 6.25% over 30 years carries interest on top of the $5,500, and it also enlarges your payment, which trims your monthly savings.

Step 4: Calculate Your Monthly Savings

The formula is simple: current P&I minus new P&I.

A worked example

Suppose a Richmond homeowner owes $350,000. To set your own balance in context, check the city-level median on Zillow’s home values page or in a Virginia REALTORS market report, since those figures update regularly. The rates below are illustrative, not quotes.

The term-reset trap

Now suppose the same borrower has only 25 years left on the 7.00% loan. The payment is about $2,474. Refinancing into a new 30-year at 6.25% drops it to about $2,155, a $319 monthly saving that looks great. But total P&I over the old remaining term is about $742,200 (roughly $392,200 in interest), while the new 30-year totals about $775,800 (roughly $425,800 in interest). You would pay about $33,600 more in interest for the lower payment.

A new 25-year loan at 6.25% has a P&I of about $2,309. That saves $165 a month and cuts lifetime interest to roughly $342,700, about $49,500 less than keeping the old loan. If you want the lower payment, a reset can be a deliberate choice. Just make it knowingly, because resetting the term is not free.

Mortgage insurance changes

Include insurance in your savings. A Conventional refinance that reaches 80% loan-to-value can remove private mortgage insurance (PMI) and add real savings. An FHA loan carries annual MIP, and the new loan’s MIP may differ from your current one. Compare the full P&I plus insurance payment on both loans.

Step 5: Divide Costs by Savings to Find Your Break-Even Month

The formula: total refinance costs divided by monthly savings equals months to break even. Using the example above, $5,500 divided by $173 is about 32 months.

Run it three ways, because how you pay the costs changes the answer. The numbers below keep the same illustrative $350,000 balance and 30-year term:

ScenarioRate (illustrative)Upfront CostNew P&IMonthly SavingsBreak-Even
Costs paid out of pocket6.25%$5,500$2,155$173About 32 months
Costs financed into the loan6.25% on $355,500$0 at closing$2,189$140About 39 months
No-out-of-pocket closing option6.625%$0, covered by lender credit$2,241$87No upfront costs to recoup

Financing the costs adds about $34 a month in payment, which stretches break-even by seven months. The no-out-of-pocket option has nothing to recoup, but you save the least each month. It suits someone who expects to move sooner or wants to keep cash in reserve.

For a second view, compare lifetime interest on a same-term loan against a reset-term loan, as in Step 4. A short break-even can still hide a more expensive loan overall.

Build your own spreadsheet

You can make a refinance break-even calculator in any spreadsheet. Put the old P&I in B1, the balance in B2, the new rate in B3, the term in months in B4, and total costs in B5. Then enter this in B6:

=B5/(B1-PMT(B3/12,B4,-B2))

The result is your break-even in months. If you finance costs, add them to the balance in B2 first.

Step 6: Compare Refinance Programs Before You Commit

The program you hold changes both your costs and your paperwork. This table summarizes general rules as of 2026. Confirm details with HUD and VA before relying on them, since they can change.

FeatureConventional Rate-and-TermFHA StreamlineVA IRRRL
Who qualifiesMost homeowners with enough equity and creditHomeowners with an existing FHA loanVeterans and service members with an existing VA loan
Credit and appraisalCredit review and usually an appraisalOften reduced documentation, and an appraisal is commonly not requiredReduced documentation, and an appraisal is commonly not required
Mortgage insurance or feePMI if equity is under 20%Upfront and annual MIP, which can be financedVA funding fee, which can be financed
Effect on break-evenAppraisal and title costs can lengthen itLower costs can shorten it, but compare MIPLower costs can shorten it, and the benefit test applies

Streamlines can skip an appraisal and cut third-party fees, which shortens break-even. The VA IRRRL also carries a net tangible benefit requirement. In general, the VA expects the new loan to lower your rate or payment and that the fees be recouped within a set period, which was 36 months when this was last confirmed. Verify the current standard on va.gov.

Loan size matters too. The 2026 conforming loan limit is $832,750 for a single-unit home (confirm at FHFA.gov). Balances above it move into Jumbo pricing, which has different rate and reserve rules, so rerun your math with Jumbo quotes.

Step 7: Decide Whether the Break-Even Point Makes Sense for You

Compare your break-even month with how long you realistically expect to stay in the home. A 32-month break-even is a good deal for someone staying ten years and a poor one for someone who might relocate in two. Military families should weigh PCS orders honestly, because a move before break-even means you paid for savings you never collected.

A short decision rule: proceed when your break-even month falls under your expected stay by a comfortable margin. A cushion of at least a year is a sensible starting point, because the unexpected usually shortens stays rather than lengthening them.

Check these other triggers before you decide:

For your next action, call Duane Buziak at (804) 212-8663. He can run your numbers across Conventional, FHA, and VA options, and the NoTouch Credit Pull keeps the first look soft.

Re-Run the Numbers With a Fresh Loan Estimate Before You Lock

Your calculation is only as good as the quote behind it. Rates and fees shift between the day you first run the math and the day you lock, so repeat Steps 3 through 5 with the final Loan Estimate and confirm the break-even still fits your plans.

Whether you’re a veteran ready to use your hard-earned benefits or a homebuyer exploring your financing options, your path to homeownership starts with expert guidance you can trust. Connect with Duane today for a personalized consultation and discover the mortgage solution tailored to your unique goals in the Stafford County and Richmond area.

Leave a Reply

Your email address will not be published. Required fields are marked *