Duane Buziak

Duane Buziak
Mortgage Maestro | NMLS #1110647 | Coast2Coast Mortgage LLC
Licensed mortgage broker serving Virginia, Florida, Tennessee, Georgia, Washington DC, North Carolina, South Carolina, and Maryland, specializing in VA home loans and first-time homebuyer programs.

Suppose you find a $400,000 listing in Richmond and assume your savings and salary can handle it. Run it as an FHA loan with 3.5% down and illustrative assumptions (6.25% rate, estimated taxes and insurance, mortgage insurance included), and the payment lands near $3,145 a month. Against $600 in other monthly debts and a 43% back-end ratio, that takes roughly $8,700 in gross monthly income, or about $104,000 a year. A home affordability calculator worksheet shows you this before you fall in love with a house.

By the end you will have a completed worksheet with a comfortable price range for FHA, VA, and Conventional loans in Richmond, VA. Before you start, gather recent pay stubs, a list of monthly debts, bank statements, and a rough credit score. Duane Buziak, NMLS #1110647, walks through each step below.

In this guide:

  1. Step 1: Gather Your Income, Debt, and Savings Numbers
  2. Step 2: Calculate Your Debt-to-Income Ratio
  3. Step 3: Choose a Loan Program and Enter Its Down Payment and Mortgage Insurance
  4. Step 4: Add Taxes, Insurance, and Other Housing Costs to Get the True Monthly Payment
  5. Step 5: Work Through a Dollar Example at Richmond’s Median Price
  6. Step 6: Set Your Comfortable Budget Ceiling, Not Just the Approval Maximum
  7. Step 7: Confirm Your Numbers with a Soft-Pull Pre-Approval
  8. What Your Finished Worksheet Should Show
  9. Frequently Asked Questions

Step 1: Gather Your Income, Debt, and Savings Numbers

Start the worksheet with three blocks: income, debts, and cash. Keep them separate so nothing gets counted twice.

Gross monthly income. This is income before taxes and deductions, taken from your pay stubs. If you are a veteran or service member, include military pay and VA disability compensation. Basic Allowance for Housing (BAH) counts when it is documented. For variable income such as overtime, commission, or bonuses, use a two-year average. Lenders verify it with tax returns and pay history, so use the lower, steadier number if the two years differ widely.

Monthly debts. List every payment that shows on your credit report:

Leave out utilities, groceries, insurance premiums, phone plans, and subscriptions. Those are real expenses, but they are not part of the lender’s debt calculation. You will account for them in Step 6.

Cash on hand. Record three figures on separate lines: money available for the down payment, money for closing costs, and money you want to keep in reserve after closing. If you have $40,000 in savings, do not write $40,000 on all three lines.

Mistake to avoid: entering take-home pay. Most worksheets and every lender’s guidelines expect gross income. Take-home pay is lower, and using it will understate what you can qualify for. It is also useful to know, though, so write it in the margin for Step 6.

Step 2: Calculate Your Debt-to-Income Ratio

Debt-to-income ratio (DTI) compares your monthly obligations to your gross monthly income. There are two versions:

The Consumer Financial Protection Bureau explains the ratio and why 43% is commonly cited in its debt-to-income guidance.

Worked line: Say you earn $6,500 gross a month and carry $600 in debts. At a 43% back-end ratio, your total obligations can reach $2,795 ($6,500 × 0.43). Subtract the $600 and your maximum housing payment is $2,195. To test a target payment of $2,000: ($2,000 + $600) ÷ $6,500 = 40.0% back-end, and $2,000 ÷ $6,500 = 30.8% front-end.

Limits differ by program. As of 2026, FHA and Conventional loans can allow higher ratios when you have strong compensating factors such as good credit, cash reserves, or a larger down payment, and automated underwriting often drives the final answer. VA loans use 41% as a guideline and also look at residual income, the money left after major obligations and living costs, rather than a single hard cap. Confirm current rules in HUD Handbook 4000.1, the VA home loan guidance, and the Fannie Mae Selling Guide.

Tip: Lenders watch the back-end number most, so fill in that line first and treat the front-end figure as a secondary check.

Step 3: Choose a Loan Program and Enter Its Down Payment and Mortgage Insurance

Make three columns or three copies of the worksheet, one per program, and enter the inputs below. Figures are as of 2026; verify them before relying on them.

The 2026 conforming loan limit is $832,750 for a one-unit home, per FHFA. Jumbo financing applies above the limit that fits your situation. VA has no loan limit for borrowers with full entitlement, though lenders still size the loan to your income.

Decision point: Mark the column that matches you. A veteran with full entitlement should keep the VA column front and center. A buyer with a 740 score and 10% saved may find Conventional PMI competitive. A buyer with a lower score and limited savings often looks first at FHA. Keep all three filled in anyway; Step 5 shows why the comparison is worth the extra minutes. Duane Buziak can help you narrow the choice if your numbers sit between two programs.

Step 4: Add Taxes, Insurance, and Other Housing Costs to Get the True Monthly Payment

Lenders qualify you on PITI: principal, interest, taxes, and insurance, plus mortgage insurance and association dues where they apply. Add one worksheet line for each:

  1. Principal and interest: from a loan calculator, using your loan amount, rate, and term.
  2. Property taxes: assessed value times the tax rate, divided by 12.
  3. Homeowners insurance: annual premium divided by 12.
  4. Mortgage insurance: FHA MIP or Conventional PMI from Step 3. VA loans have no monthly mortgage insurance.
  5. HOA or condo fees: monthly dues, if any.

For taxes, use the current City of Richmond real estate tax rate per $100 of assessed value. Do not guess; check the city’s assessor and finance pages at rva.gov and confirm the rate for the current tax year. Assessed value can also differ from the price you pay, so look up the property’s assessment when you have a specific home in mind.

For insurance, use a placeholder range on the worksheet until you have a quote. Call an insurance agent with the property address and get a real number, because coverage costs vary with the home’s age, roof, and claims history.

Then add one more line that stays outside the lender’s DTI: maintenance and utilities. A common budgeting habit is to set aside a monthly amount for repairs and add your expected electric, water, and internet costs. Lenders do not count these, but your bank account does.

Mistake to avoid: running principal and interest alone. It understates the payment, often by several hundred dollars a month, and it makes every price look easier than it is.

Step 5: Work Through a Dollar Example at Richmond’s Median Price

For a city-wide benchmark, check the current Richmond median on Zillow’s home values pages or in Virginia REALTORS market data, and note the month and year you pulled it. For this illustration we use a round $375,000 as a stand-in for a Richmond city-wide median; replace it with the current published figure on your own worksheet.

Illustrative assumptions, not a quote: 6.25% rate on a 30-year fixed loan for all three programs, $1.20 per $100 of assessed value for taxes (placeholder, so $375 a month), $150 a month for insurance, $600 in other debts, a first-use VA funding fee of 2.15% with no down payment, FHA upfront MIP of 1.75% financed with annual MIP of 0.55%, and PMI of 0.60% on the Conventional loan. Check Freddie Mac’s PMMS for the current average rate; your actual rate depends on your profile and is never guaranteed.

Item at $375,000FHA LoanVA LoanConventional Loan
Down payment3.5% ($13,125)0% ($0)5% ($18,750)
Loan amount$368,208 (with financed upfront MIP)$383,063 (with financed funding fee)$356,250
Mortgage insurance or fee$166/month annual MIP, plus $6,333 upfront MIP financed$8,063 funding fee financed, no monthly MI$178/month PMI
Principal and interest$2,267$2,359$2,194
Estimated total payment (with taxes and insurance)$2,958$2,884$2,897
Gross monthly income needed at 43% back-end$8,274$8,101$8,132

The delta is small but real: the FHA payment runs $74 a month above VA and $61 above Conventional in this scenario, while the cash needed up front moves the other way, from $0 for VA to $18,750 for Conventional. Many eligible veterans are exempt from the funding fee, which would lower the VA figures further. The same price produces different payments and different income requirements, which is why many buyers use a “Dare to Compare” approach and run every program before choosing.

Step 6: Set Your Comfortable Budget Ceiling, Not Just the Approval Maximum

The number from Step 2 is the most a lender may allow. It is not a recommendation. Write both on the worksheet: the lender-maximum payment and a personal comfort payment.

To find the comfort payment, start with your take-home pay from Step 1 and subtract what life actually costs: retirement and emergency savings, childcare, commuting, utilities, maintenance, and anything uncertain ahead. Military families should weigh PCS orders, which can mean renting or selling sooner than planned, and anyone should consider the stability of a dual income. As a hedge rather than a rule, many buyers choose a payment comfortably below the maximum. Where yours lands depends on your cushion.

Next, add a cash-to-close line:

Seller concessions and no-out-of-pocket closing options may reduce what you bring to the table. Those depend on the contract, the program, and the market, so treat them as items to discuss, not numbers to count on.

Finally, convert the payment to a price. Working backward from your comfort payment with the Step 5 method, write three numbers at the bottom of the worksheet: a low price (very comfortable), a target price (where you hope to land), and a ceiling (a price you will not exceed even in a competitive offer).

Step 7: Confirm Your Numbers with a Soft-Pull Pre-Approval

Your worksheet is an estimate, and underwriting can move it. Your credit tier affects your rate and mortgage insurance cost. Income is verified against documents, assets are sourced, and the property itself, through its appraisal, taxes, and any association dues, sets final figures.

Duane Buziak offers NoTouch Credit Pull, a soft-pull pre-approval tool, so you can check where your numbers stand before a hard inquiry goes on your credit report. That makes it a low-risk way to test the worksheet against your real profile.

Bring the completed worksheet to the conversation. Starting with your low, target, and ceiling prices, your DTI math, and your cash-to-close line means the call begins with real figures instead of general questions. You can reach Duane at (804) 212-8663.

After that, the next actions are simple:

  1. Collect your documents: pay stubs, W-2s or tax returns, bank statements, and, for veterans, your Certificate of Eligibility details and any VA award letter.
  2. Get a formal pre-approval letter based on verified information.
  3. Begin house shopping within your ceiling number, not above it.

What Your Finished Worksheet Should Show

When you finish, your page should hold these items:

Whether you’re a veteran ready to use your hard-earned benefits or a homebuyer exploring your financing options, your path to homeownership starts with expert guidance you can trust. Connect with Duane today for a personalized consultation and discover the mortgage solution tailored to your unique goals in the Stafford County and Richmond area. Richmond Home Loans by Duane Buziak can also run your numbers through hundreds of wholesale lenders once you are ready to compare.

Leave a Reply

Your email address will not be published. Required fields are marked *